Scroll

12 Jan 2016 / Hong Kong

Construction of seawall and installation of water intake culvert at power station

For approximately 6 months, marine works involving construction of seawall and installation of water intake culvert will be carried [at the Black Point Power Station] out in the area bounded by straight lines joining the following co-ordinates (WGS 84 Datum) from (A) to (H) and the adjacent shoreline:
(A) 22 deg. 24.670’N / 113 deg. 54.352’E
(B) 22 deg. 24.750’N / 113 deg. 54.265’E
(C) 22 deg. 24.803’N / 113 deg. 54.322’E
(D) 22 deg. 24.851’N / 113 deg. 54.273’E
(E) 22 deg. 24.889’N / 113 deg. 54.314’E
(F) 22 deg. 24.842’N / 113 deg. 54.364’E
(G) 22 deg. 25.044’N / 113 deg. 54.576’E
(H) 22 deg. 24.967’N / 113 deg. 54.659’E

The works will be carried out by a flotilla of vessels including one crane barge, three derrick barges and two flat-top barges. Some tugs and one work boat will provide assistance. The number of vessels engaged in the works will change from time to time to suit operational requirements.

A working area of approximately 50 metres will be established around each barge. Yellow marker buoys fitted with yellow flashing lights will be laid to mark the positions of the anchors extending from the barges.

The hours of works will be round-the-clock.

Diving operations will be carried out from time to time during the hours of works.

Vessels engaged in the operations will display signals as prescribed in international and local regulations.

Vessels navigating in the vicinity should proceed with caution and keep clear at slow speed, bearing in mind there are divers working in the area.

(For information about operations in Hong Kong contact GAC Hong Kong at [email protected])

Source: Government of Hong Kong SAR Marine Department Notice No.8 of 2016

If quoting any content from Hot Port News, please cite GAC Hot Port News as the source.

Make an
enquiry

enquiry icon

Find your
country

country icon